At ENTEGEE, you’ll find
the technical position
you’ve been searching for

Machinist - 60971336 - TV

Job Code: 60971336
Job Location: Beltsville, MD
Category: Technicians
Last Updated: 02/28/2018
Apply Now!

Job Description:
Seeking a Machinist to join our Machine Shop team.  
Description/Duties -
• This position will primarily be responsible for supporting the machining operations of our heatpipe manufacturing line specifically focused on the end prep/groove machining operation for the heatpipe manufacturing flow.
• Sets up and operates machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal / composite parts, mechanisms, tools, or machines to exacting tolerances and dimensions.
• Interprets blueprints, sketches/shop drawings, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup.
• Uses a variety of machinist’s hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribe’s dimensions and reference points to lay our stock for machining. Some machines may be numerically controlled (CNC).
Required Skills/Abilities -
• Set up, program and operate small and large Bridgeport, mills and a variety of conventional machines. Knowledge and/or experience in the operation of CNC mills and lathes a plus.
• Knowledge of Fanuc, Haas, Fagor & Fadel CNC controls a plus
• Ability to read, write and interpret written instructions, blueprints, shop drawings and engineering specifications in English
• Proficient use of basic shop arithmetic
• Ability to use machinist handbook to solve machining problems involving trigonometry and machine feeds and speeds depending on the material and tolerance specified
• Identifies opportunities for continuous improvement with a focus on customer service excellence.
• Ability to work with minimal supervision including setting up and operating all conventional machines commonly found in a machine shop, operation of CNC machines a plus
• Ability to lift a minimum of 25 lbs.
• Ability to work flexible hours, overtime, and weekends as needed based on demanding manufacturing schedules
• Ability to stand as needed to operate tools/equipment for up to 9 hours each day (9/80 work schedule)
• High school diploma or equivalent. AA degree in related field preferred.
• Minimum 2-3 years diversified machining experience with large & small equipment/tools in an aerospace manufacturing environment or related industry.
• Experience in composite machining a plus
For more information about this position, please contact the Entegee New Hope, MN office at 763-577-9000 or
Please reference job # 60971336TV
Equal Opportunity Employer


Bold text indicates required items.

Contact Information
Mr. Mrs. Ms.

*Enter your cell phone carrier to receive job opportunity alerts via text.
Your Resume *

Please select a resume that you would like to upload to the server and make sure the name contains only ONE period within the filename.

We only support [.doc, .docx, .htm, .html, .pdf, .rtf, .txt, .wps, .wpd] file extensions.

File to Upload:

Option 2:  Cut-and-Paste Resume

If your resume is not in one of the acceptable formats listed above, you may cut-and-paste it as ASCII Text in the box below.

Entegee is an equal opportunity employer. Entegee considers applicants for all positions without discrimination on the basis of race, color, religion, sex, national origin, age, marital or veteran status, disability, or any other legally protected status. No question in the website is used for the purpose of limiting or excluding any applicant's consideration for employment on any basis prohibited by local, state, or federal law.

Search Jobs

Current Search

Not Specified
Not Specified
Not Specified
Not Specified